Training Course Catalog
FSP 150 CP/Mx Technical Training
The FSP 150 CP/MX Technical Training course is designed to familiarize the attendee with the FSP 150 CP/MX product set, its operation and its configuration options. Upon completion of this course, the attendee should be able to install and trouble-shoot networks based upon the FSP 150 CP/MX product.
Duration: 2.5 Days
Prerequisites: Basic understanding of Fiber Optics, Ethernet and IP networking.
FSP 150 CC Technical Training
The FSP 150CC Technical Training course is designed to familiarize the attendee with the FSP 150 CC product family, its operation and its configuration options. Upon completion of this course, the attendee should be able to turn up the FSP 150CC and trouble-shoot issues related to the FSP 150CC product.
The course must be tailored to cover either the FSP 150CCf-825 or other FSP 150CC products as it is not possible to cover all FSP 150CC products in 3 days.
Duration: 3 Days
Prerequisites: Basic understanding of Fiber Optics, Ethernet and IP networking.
FSP 500 Technical Training
The FSP 500 Technical Training course is designed to familiarize the attendee with the FSP 500 product set, its operation and its configuration options. Upon completion of this course, the attendee should be able to install and trouble-shoot networks based upon the FSP 500 product.
Duration: 1 Day
Prerequisites: Basic understanding of Fiber Optics, Ethernet and IP networking.
FSP 1500 Technical Training (EMEA Only)
The FSP 1500 Technical Training course is designed to familiarize the attendee with the FSP 1500 product set, its operation and its configuration options. Upon completion of this course, the attendee should be able to install and trouble-shoot networks based upon the FSP 1500 product.
Duration: 2 Days
Prerequisites: Basic understanding of Fiber Optics, Ethernet, SONET/SDH and IP networking.
FSP 2000 Technical Training
The FSP 2000 Technical Training course is designed to familiarize the attendee with the FSP 2000 product set, its operation and its configuration options. Upon completion of this course, the attendee should be able to install and trouble-shoot networks based upon the FSP 2000 product.
Duration: 2 Days
Prerequisites: Basic understanding of Fiber Optics, WDM, IP networking and the Unix command set.
FSP 3000 Technical Training
The FSP 3000 Technical Training course is designed to familiarize the attendee with the FSP 3000 product set, its operation and its configuration options. Upon completion of this course, the attendee should be able to install and trouble-shoot networks based upon the FSP 3000 product.
Duration: 3 Days
Prerequisites: Basic understanding of Fiber Optics, WDM, IP networking and the Unix command set.
FSP 3000 R7 Technical Training (non roadm configuration)
The 3000 R7 Technical Training course is designed to familiarize the attendee with the FSP-3000 product set, its operation and its configuration options. Upon completion of this course, the attendee should be able to install and trouble-shoot networks based upon the 3000 R7 product.
Duration: 3 Days
Prerequisites: Basic understanding of Fiber Optics, WDM, IP networking and the Unix command set.
FSP 3000 R7 Technical Training (with ROADM or 8ROADM configuration)
The 3000 R7 Technical Training course is designed to familiarize the attendee with the FSP-3000 product set, its operation and its configuration options. Upon completion of this course, the attendee should be able to install and trouble-shoot networks based upon the 3000 R7 product.
Duration: 4 Days
Prerequisites: Basic understanding of Fiber Optics, WDM, IP networking and the Unix command set.
FSP NM Technical Training
A training course which explains in detail the software and its relationship to other hardware and software components. Troubleshooting and configuration exercises are essential elements of the training to assure that the attendants gain a comprehensive understanding of the software’s operation.
To achieve self sufficiency at installation, configuration and maintenance of the FSP Network Management applications. To become an ADVA Optical Networking certified FSP Network Management specialist. Small courses, 8 attendants maximum
Duration: 2 Days
Prerequisites: The attendees should have basic knowledge about Networking, TCP/IP, SNMP and Fault Monitoring.
Hatteras HN4000/HN400 Technical Training
The HN4000/HN400 Technical Training course is designed to familiarize the attendee with the HN4000 and HN400 product set, its operation and its configuration options. Upon completion of this course, the attendee should be able to install and trouble-shoot networks based upon the HN4000/HN400 products.
Duration: 2.5 Days
Prerequisites: Basic understanding of Ethernet, IP networking and DSL.
FSP3000 Product Overview ADVA-OVR-101 Training
The FSP3000RE/RR Product Overview Training course is designed to familiarize the attendee with the FSP-3000 product family set, which consists of the FSP3000-RE-I, FSP3000 RE-II, FSP3000 RE-II with Eroadm, FSP3000 RR (RAYroadm) and the Network Management System RAYtracer. Also covered is the RAYos and its capabilities. Upon Completion of this course the user will have an understanding of the product family that can be integrated to meet the demands of today’s growing networks
Duration: .5 to 1 day
Prerequisites: Basic understanding of Fiber Optics, WDM, IP networking, fiber test equipment and the CLI command set.
FSP3000 RE-I ADVA-ICM-201 Technical Training
The FSP3000RE-I Technical Training course is designed to familiarize the attendee with the FSP-3000 product set, its operation and its configuration options. Upon completion of this course, the attendee should be able to install and trouble-shoot networks based upon the FSP3000 RE-I product.
Duration: 4 Days
Prerequisites: Basic understanding of Fiber Optics, WDM, IP networking, fiber test equipment and the CLI command set.
FSP3000 RR ADVA-ICM-204 Technical Training
The FSP3000RR Technical Training course is designed to familiarize the attendee with the FSP-3000 product set, its operation and its configuration options. Upon completion of this course, the attendee should be able to install and trouble-shoot networks based upon the FSP3000 RR product. The User must specify DCE or SCE configuration to insure correct course.
Duration: 4 Days
Prerequisites: Basic understanding of Fiber Optics, WDM, IP networking, fiber test equipment and the CLI command set.
FSP3000 RE-II ADVA-ICM-205 Technical Training
The FSP3000RE-II Technical Training course is designed to familiarize the attendee with the FSP-3000 product set, its operation and its configuration options. Upon completion of this course, the attendee should be able to install and trouble-shoot networks based upon the FSP3000 RE-II product.
Duration: 4 Days
Prerequisites: Basic understanding of Fiber Optics, WDM, IP networking, fiber test equipment and the CLI command set.
FSP3000 RE-II with EROADM ADVA-ICM-206 Technical Training
The FSP3000RE-II with Eroadm Technical Training course is designed to familiarize the attendee with the FSP-3000 product set, its operation and its configuration options. Upon completion of this course, the attendee should be able to install and trouble-shoot networks based upon the FSP3000 RE-II with Eroadm product.
Duration: 4 Days
Prerequisites: Basic understanding of Fiber Optics, WDM, IP networking, fiber test equipment and the CLI command set.
FSP3000 RE/RR RAYtracer Operators Technical Training
The RAYtracer Operators course is designed to familiarize the attendee with the Network Management Software, its operation and its configuration options. Upon completion of this course, the attendee should be able to commission, administrator, provision, maintain, upgrade software, back up databases, and trouble-shoot networks for the FSP3000 Product Family wit the RAYtracer software.
Duration: 4 Days
Prerequisites: Basic understanding of Fiber Optics, WDM, IP networking, fiber test equipment and the CLI command set and standard GUI operations. ADVA-ICM-201 / 204 / 205 or 206
FSP3000 RE/RR RAYtracer Administrators Technical Training
The RAYtracer Operators course is designed to familiarize the attendee with the Network Management Software is setting up the sever for Windows, Linux and Unix applications. Upon completion of this course, the attendee should be able to facilitate and maintain the required Standalone or Hot-standby RAYtracer OS on their CPU platforms.
Duration: 1 Day
Prerequisites: Basic understanding of Windows, Linux and Unix Commands, Ip networking, GUI fundamentals, CPU portioning, Firewall port operations and Access Control List management.
FSP3000 PEO Engineering Technical Training
The FSP3000 Planning, Engineering and Ordering course is designed to familiarize the attendee with the FSP-3000 RE- I, RE-II, EROADM and RAYroadm system engineering. This covers creating a BOM , Specifications, Architecture, protection methods and implementation, system topologies, equipment mounting rules, span design and dispersion calculations. Also covered are EDFA and RAMAN amplification theory. Upon Completion of this of this course the user should be able to configure, design and order the FSP3000 RE/RR product family using the technical documentation and planning tools for typical DWDM networks. Lead there network teams in detailed signal flow and power distribution through each circuit pack of their network
Duration: 2-3 Days
Prerequisites: Basic understanding of Fiber Optics, WDM, IP networking, fiber test equipment and the CLI command set. Basic DWDM span design. Industry standards as applies to SONET, SDH, IP and DWDM.
FSP3000 Product RE Overview ADVA-OVW-RE Training
The FSP3000RE Overview Training course is designed to familiarize the attendee with the FSP-3000 RE- I and RE-II pr0duct set via lecture or Webinar. This course expands on the product overview and focuses on the RE product, Installation walk through, typical engineering packages, software features and high level signal flow. This can be used as an advanced primer to the ADVA-ICM-201/205 or 206 courses or a review for those who have been away from the product and require a review of the product in a detailed approach. Upon Completion of this of this course the user should be able to understand the RE family, engineering requirements,, needed installation steps and sequence of a successful turn-up from a system level.
Duration: 1-2 Days
Prerequisites: Basic understanding of Fiber Optics, WDM, IP networking, fiber test equipment and the CLI command set.
FSP3000 LMC SPC Technical Training course
The FSP 3000RE LMC Training course is designed to focus the student’s attention with highly concentrated RE product review and expand their troubleshooting experience by showing the students how troubleshoot via CLI and RAYtracer GUI’s. Systematic methodology is used to introduce and sharpen the users understanding of each method and enhance their abilities to trouble specific problems.
Duration: 2 Days
Prerequisites: Basic understanding of Fiber Optics, WDM, IP networking, fiber test equipment and the CLI command set. ADVA-ICM-201/204/205 or 206. ADVA-OAP-401
FSP3000 NTM-700 RE/RR Advanced Troubleshooting Training
The FSP 3000Network Troubleshooting and Management Training course is designed to be a intensive 2 day continuous troubleshooting session that intensifies the user understanding of common troubleshooting faults seen in the field and increasingly more difficult faults. Upon completion of this course, the attendee should be able to determine and clear their networks for the faults shown in the class. This is ideal for the Tier 3 level support most companies turn to as there subject matter experts.
Duration: 2 Days
Prerequisites: Basic understanding of Fiber Optics, WDM, IP networking, fiber test equipment and the CLI command set. ADVA-ICM-201/204/205 or 206. ADVA-OAP-401
FSP 500 Technical Training
A training course which explains in detail each of the product’s components, its implementation and its relationship to other components. Troubleshooting and configuration exercises are essential elements of the training to assure that the attendants gain a comprehensive understanding of the device’s operation. To achieve self sufficiency at installation, configuration and maintenance of the FSP 1500 product. To become an ADVA Optical Networking certified expert. Small courses, 8 attendants maximum.
Duration: 1 Day
Prerequisites: The attendees should have basic knowledge about SONET/SDH, TCP/IP, GFP and LCAS.
ADVA Optical Networking Certified Expert
This is a product specific four hour exam which will test the participant’s skills for a given ADVA Optical Networking product. Upon passing the exam, the participant will receive a diploma, which will be valid for two years.
Duration: 4 Hours
Prerequisites: Product Knowledge for the ADVA Optical Networking product being tested on